Electromagnetic flow meter

●Diameter DN(mm)                       

PTFE pipeline：                             

10,15,20,25,32,40,50,65,80,100,125                

150,200,250,300,350,400.450,500,600

Rubber pipeline：

40，50，65，80，100，125，150，200，300

350，400，500，600，800，1000，1200

Note:

Special specifications can be customized。

●Flow direcetion

Positive, negative, net flow,

Turndown ratio: 150:1

Repeatability error: ±0.1% of measured value

● Accuracy grade: Pipeline: 0.5, 1.0

● Measured medium temperature:

Ordinary rubber lining: -20~+60°C

High temperature rubber lining: -20~+90°C

Teflon lining: -30~+100°C

High temperature type vinyl lining: -30~+180°C

● Rated working pressure:

Pipeline type: DN10-DN65: ≤2.5Mpa, DN80-DN150: ≤1.6Mpa,

DN200-DN1200: ≤1.0Mpa

Note: Special pressures can be ordered.

● Flow measurement range:

Flow measurement range convection speed range is 0.3-15m/s

● Conductivity range:

    The measured fluid conductivity ≥ 5μs/cm

Most of the medium with water as its component, its conductivity in the range of 200-800μs/cm, can use electromagnetic flow;

● Output current and load resistance:

4~20mA fully isolated load resistance <750 ohm pulse frequency 0-1KHZ photoelectric isolation OCT external power supply ≤35V

Maximum collector current is 25mA during conduction

● Electrode material:

Molybdenum-containing stainless steel, titanium (Ti), tantalum (Ta), Hastelloy (H), platinum (Pt), or other special electrode materials

●Protection level: Submersible type: IP68, other type IP65

● Power supply:

85~265V, 45~63HZ

● Straight section length:

Pipe type: Upstream ≥ 5DN, Downstream ≥ 2DN

● Connection method:

Flange connections are used between the flow meter and the piping. The size of the flange connection should meet the requirements of GB9119-88.

● Riot flag: mdllBT4

● Ambient temperature: -25°C~+60°C

Relative temperature: 5%~95%

● Consumption of total power: less than 20W